Quick-connect fittings for cable trays snap, slide, or lock together, allowing fast, secure installation with minimal tools.

Preparation

1. Select the correct fitting for your cable tray system, ensuring compatibility with the manufacturer's brand and tray type .
2. Measure and mark the cable using the Cut Gauge Line on the Quick-Connect® body to determine the proper trim length .
3. Stretch the cable tight and trim it at the marked point to ensure a precise fit .
4. Lubricate protection seals with silicone spray to ease installation and protect long-term performance .

Installing the Fitting

1. Install the Hanger Bolt first: Drill a pilot hole (typically 7/64” or 7/32” for 3/16” fittings) into the mounting post. Drive the Hanger Bolt into the post until the threaded section protrudes about 1 inch .
2. Attach the Quick-Connect® body: Insert the cable fully into the fitting; the jaws will automatically lock onto the cable .
3. Adjust tension: Use the turnbuckle or tension adjustment fitting to achieve the desired cable tension. For surface mount or jaw turnbuckle fittings, set the turnbuckle in mid-position before installation for optimal flexibility .
4. Secure the lock-nut: Spin the lock-nut against the swivel component to prevent loosening, then tighten with wrenches to the final tension .
5. Check the jaws: Ensure the jaws are fully seated and gripping the cable securely. Tap the cable line with your palm several times if necessary to confirm proper engagement .

Tips and Safety

• Install fixed-style end fittings first before attaching adjustable tension fittings to simplify alignment .
• Do not attach the Hanger Bolt with the Quick-Connect® fitting already on, as this can damage the fitting .
• Use appropriate tools such as sockets, wrenches, or electric drills for pilot holes and bolt tightening .
• Verify load capacity and spacing of supports to ensure the cable tray system can safely hold the cables .
• Follow manufacturer instructions for any specific variations in fitting types or installation sequences . By following these steps, quick-connect fittings can reduce installation time by 30–50% compared to traditional bolted connections, while maintaining a secure and durable cable tray system .